Microsoft 070-536-Csharp Prüfung Übungen und Antworten

Die Schulungsunterlagen zur Microsoft 070-536-Csharp Zertifizierungsprüfung von Pass4Test werden die größten Erfolgsquote erzielen. Naben den Büchern sind heutztage das Internet als ein Wissensschatz angesehen. In Pass4Test können Sie Ihren Wissensschatz finden. Das ist eine Website, die Ihnen sehr helfen können. Sie werden sicher komplizierte Übungen treffen, Unser Pass4Test wird Ihnen helfen, die Prüfung ganz einfach zu bestehen, weil es alle notwendigen Kenntnisse zur Microsoft 070-536-Csharp Zertifizierungsprüfung enthält.

Leute aus verschiedenen Bereichen bemühen sich um ihre Zukunft. Bemühen Sie sich auch um Erhöhung Ihrer Fähigkeit? Bekommen Sie die Microsoft 070-536-Csharp Zertifizierung? Wie viel wissen Sie über Microsoft 070-536-Csharp Zertifizierungsprüfung? Was sollen Sie machen, wenn Sie nicht genug Kenntnisse für 070-536-Csharp Prüfung beherrschen? Machen Sie sich keine Sorge. Pass4Test kann Ihnen Hilfe bieten.

Microsoft 070-536-Csharp Unterlagen von Pass4Test sind besser als andere entsprechende Unterlagen für Microsoft 070-536-Csharp Prüfung, weil sie einmaligen Erfolg der Prüfung gewährleisten. Die hohe Durchlaufrate sind von vielen Teilnehmern geprüft. Microsoft 070-536-Csharp dumps von Pass4Test sind der erfolgsreiche Weg. Sie können viel Zeit für die Vorbereitung der Prüfung sparen und auch mit guter Note die Zertifizierungsprüfung machen.

Exam Code: 070-536-Csharp
Prüfungsname: TS:MS.NET Framework 2.0-Application Develop Foundation
Aktulisiert: 2014-03-11
Nummer: 160 Q&As

Konfrontieren Sie sich in Ihrer Karriere mit Herausforderung? Wollen Sie anderen Ihre Fähigkeit zeigen? Wollen Sie mehr Chancen Ihre Arbeitsstelle erhöhen? Nehmen Sie bitte an IT-Zertifizierungsprüfungen teil. Die Microsoft Zertifizierungsprüfungen sind sehr wichtig in IT-Industrie. Wenn Sie Microsoft Zertifizierung besitzen, können Sie viele Hilfen bekommen. Beginnen Sie bitte mit der Microsoft 070-536-Csharp Zertifizierungsprüfung, weil die sehr wichtig in Microsoft ist. Und Wie können Sie diese Prüfung einfach bestehen? Die Pass4Test Prüfungsunterlagen können Ihren Wunsch erreichen.

Pass4Test ist eine spezielle Website, die Schulungsunterlagen zur Microsoft 070-536-Csharp Zertifizierungsprüfung bietet. Hier werden Ihre Fachkenntnisse nicht nur befördert werden. Und Sie können zwar die Prüfung nur einmal bestehen können. Die Schulungsunterlagen von Pass4Test werden von den erfahrungsreichen Fachleuten nach ihren Erfahrungen und Kenntnissen bearbeitet. Sie sind von guter Qualität und extrem genau. Pass4Test wird Ihnen helfen, nicht nur die Microsoft 070-536-Csharp Zertifizierungsprüfung zu bestehen und zwar Ihre Fachkenntnisse zu konsolidieren. Außerdem genießen Sie einen einjährigen Update-Service.

Alle IT-Fachleute sind mit der Microsoft 070-536-Csharp Zertifizierungsprüfung vertraut. Sie alle träumen davon, ein Zertifikat zu bekommen. Suie können Ihren Traum erreichen und eine gute Berufskarriere haben. Durch die Schulungsunterlagen zur Microsoft 070-536-Csharp Zertifizierungsprüfung von Pass4Test können Sie bekommen, was Sie wollen.

070-536-Csharp prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/070-536-Csharp.html

NO.1 You are creating a class named Temperature. The Temperature class contains a public field named F.
The public field F represents a temperature in degrees Fahrenheit.
You need to ensure that users can specify whether a string representation of a Temperature instance
displays the Fahrenheit value or the equivalent Celsius value.
Which code segment should you use?
A. public class Temperature : IFormattable {
public int F;
public string ToString(string format, IFormatProvider fp) {
if ((format == "F")|| (format == null)) return F.ToString();
if (format == "C") return ((F - 32) / 1.8).ToString();
throw new FormatException("Invalid format string");
}
}
B. public class Temperature : ICustomFormatter {
public int F;
public string Format(string format, object arg,
IFormatProvider fp) {
if (format == "C") return ((F - 32) / 1.8).ToString();
if (format == "F") return arg.ToString();
throw new FormatException("Invalid format string");
}
}
C. public class Temperature {
public int F;
public string ToString(string format, IFormatProvider fp) {
if (format == "C") {
return ((F - 32) / 1.8).ToString();
} else {
return this.ToString();
}
}
}
D. public class Temperature {
public int F;
protected string format;
public override String ToString() {
if (format == "C")
return ((F - 32) / 1.8).ToString();
return F.ToString();
}
}
Answer: A

Microsoft prüfung   070-536-Csharp prüfungsfragen   070-536-Csharp   070-536-Csharp   070-536-Csharp echte fragen

NO.2 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. public delegate int PowerDeviceOn(bool result,
DateTime autoPowerOff);
B. public delegate bool PowerDeviceOn(object sender,
EventArgs autoPowerOff);
C. public delegate void PowerDeviceOn(DateTime autoPowerOff);
D. public delegate bool PowerDeviceOn(DateTime autoPowerOff);
Answer: C

Microsoft testantworten   070-536-Csharp zertifizierung   070-536-Csharp zertifizierungsfragen   070-536-Csharp echte fragen

NO.3 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
01 public void StartService(string serverName){
02 ServiceController crtl = new
03 ServiceController("FileService");
04 if (crtl.Status == ServiceControllerStatus.Stopped){
05 }
06 }
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName;
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName;
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName;
D. Insert the following line of code between lines 04 and 05:
crtl.Continue();
E. Insert the following line of code between lines 04 and 05:
crtl.Start();
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0);
Answer: BE

Microsoft testantworten   070-536-Csharp exam fragen   070-536-Csharp exam fragen   070-536-Csharp prüfung

NO.4 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t =
new Dictionary<string, string>();
MyDictionary dictionary = (MyDictionary)t;
Answer: A

Microsoft   070-536-Csharp originale fragen   070-536-Csharp prüfungsfrage   070-536-Csharp prüfungsunterlagen

NO.5 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D

Microsoft   070-536-Csharp echte fragen   070-536-Csharp   070-536-Csharp prüfung   070-536-Csharp zertifizierungsantworten   070-536-Csharp

NO.6 You need to write a code segment that will assign the name of the configuration file that the current
application domain uses to a string variable named configFile.
Which two code segments should you use to achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. AppDomain domain = AppDomain.CurrentDomain;
configFile =
domain.GetData("APP_CONFIG_FILE").ToString();
B. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = domain.SetupInformation;
configFile = setup.ConfigurationFile;
C. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = new AppDomainSetup();
configFile = setup.ConfigurationFile;
D. AppDomainSetup setup = new AppDomainSetup();
AppDomain domain = AppDomain.CreateDomain("current",
null, setup);
configFile = setup.ConfigurationFile;
Answer: AB

Microsoft exam fragen   070-536-Csharp   070-536-Csharp   070-536-Csharp prüfung

NO.7 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ThreadStart(PerformCalculation));
newThread.Start(myValues);
}
B. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
ThreadStart delStart = new
ThreadStart(PerformCalculation);
Thread newThread = new Thread(delStart);
if (newThread.IsAlive) {
newThread.Start(myValues);
}
}
C. private void PerformCalculation (CalculationValues values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Application.DoEvents();
PerformCalculation(myValues);
Application.DoEvents();
}
D. private void PerformCalculation(object values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ParameterizedThreadStart(PerformCalculation));
newThread.Start(myValues);
}
Answer: D

Microsoft prüfungsfragen   070-536-Csharp zertifizierung   070-536-Csharp antworten

NO.8 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.LoadFrom(myPath);
B. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.Load(myPath);
C. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.DynamicDirectory,
"Assembly1.dll");
Assembly asm = AppDomain.CurrentDomain.Load(myPath);
D. AppDomain domain = AppDomain.CurrentDomain;
Assembly asm = domain.GetData("Assembly1.dll");
Answer: A

Microsoft prüfungsfrage   070-536-Csharp   070-536-Csharp   070-536-Csharp   070-536-Csharp

NO.9 You are instantiating a variable to store only strings. The variable is named messageStore.
You need to ensure that string messages are read and processed in the order in which they are received.
Which code segment should you use?
A. Stack<string> messageStore = new Stack<string>();
messageStore.Push("This is a test message...");
B. Stack messageStore = new Stack();
messageStore.Push("This is a test message...");
C. Queue messageStore = new Queue();
messageStore.Enqueue("This is a test message...");
D. Queue<string> messageStore = new Queue<string>();
messageStore.Enqueue("This is a test message...");
Answer: D

Microsoft prüfungsunterlagen   070-536-Csharp echte fragen   070-536-Csharp   070-536-Csharp

NO.10 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft   070-536-Csharp zertifizierung   070-536-Csharp zertifizierung   070-536-Csharp

NO.11 You create a class that is derived from the Installer class. The class you create is used to perform a
component installation.
The component installation overwrites the value of a registry key. You create a method named
GetRegValue that returns the current value of the registry key.
You need to add a code segment that preserves the original value of the registry key if the component is
uninstalled.
Which code segment should you use?
A. private void BeforeUninstallEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
B. private void CommittedEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
C. public override void Uninstall(
IDictionary savedState) {
base.Uninstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
D. protected override void OnBeforeInstall(
IDictionary savedState) {
base.OnBeforeInstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
Answer: D

Microsoft   070-536-Csharp testantworten   070-536-Csharp

NO.12 You write the following code.
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs {
private string coverPageInfo;
public FaxArgs(string coverInfo) {
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
D. public class FaxArgs : EventArgs {
private string coverPageInfo;
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
Answer: A

Microsoft   070-536-Csharp   070-536-Csharp

NO.13 You are developing a routine that will periodically perform a calculation based on regularly changing
values from legacy systems. You write the following lines of code. (Line numbers are included for
reference only.)
01 bool exitLoop = false;
02 do {
03
04 exitLoop = PerformCalculation();
05 } while (!exitLoop);
You need to write a code segment to ensure that the calculation is performed at 30-second intervals. You
must ensure that minimum processor resources are used between the calculations.
Which code segment should you insert at line 03?
A. Thread.Sleep(30000);
B. Thread.SpinWait(30000);
C. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.BelowNormal;
D. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.Lowest;
E. Thread.SpinWait(30);
Answer: A

Microsoft   070-536-Csharp zertifizierungsantworten   070-536-Csharp antworten   070-536-Csharp testantworten   070-536-Csharp antworten

NO.14 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
è Initialize each answer to true.
è Minimize the amount of memory used by each survey.
Which storage option should you choose?
A. BitVector32 answers = new BitVector32(1);
B. BitVector32 answers = new BitVector32(-1);
C. BitArray answers = new BitArray (1);
D. BitArray answers = new BitArray(-1);
Answer: B

Microsoft prüfungsfragen   070-536-Csharp dumps   070-536-Csharp echte fragen   070-536-Csharp

NO.15 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
public class Department {
public string name;
public string manager;
}
Each application uses a custom configuration section to store department-specific values in the
application configuration file as shown in the following code.
<Department>
<name>Hardware</name>
<manager>Amy</manager>
</Department>
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. public class deptElement : ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = ConfigurationManager.AppSettings["name"];
dept.manager =
ConfigurationManager.AppSettings["manager"];
return dept;
}
}
B. public class deptElement: ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = reader.GetAttribute("name");
dept.manager = reader.GetAttribute("manager");
}
}
C. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.SelectSingleNode("name").InnerText;
dept.manager =
section.SelectSingleNode("manager").InnerText;
return dept;
}
}
D. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.Attributes["name"].Value;
dept.manager = section.Attributes["manager"].Value;
return dept;
}
}
Answer: C

Microsoft   070-536-Csharp   070-536-Csharp   070-536-Csharp   070-536-Csharp exam fragen

NO.16 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
<ProjectSection name="Project1">
<role name="administrator" />
<role name="manager" />
<role name="support" />
</ProjectSection>
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. public class Role : ConfigurationElement {
internal string _ElementName = "name";
[ConfigurationProperty("role")]
public string Name {
get {
return ((string)base["role"]);
}
}
}
B. public class Role : ConfigurationElement {
internal string _ElementName = "role";
[ConfigurationProperty("name", RequiredValue = true)]
public string Name {
get {
return ((string)base["name"]);
}
}
}
C. public class Role : ConfigurationElement {
internal string _ElementName = "role";
private string _name;
[ConfigurationProperty("name")]
public string Name {
get {
return _name;
}
}
}
D. public class Role : ConfigurationElement {
internal string _ElementName = "name";
private string _name;
[ConfigurationProperty("role", RequiredValue = true)]
public string Name {
get {
return _name;
}
}
}
Answer: B

Microsoft exam fragen   070-536-Csharp   070-536-Csharp exam fragen   070-536-Csharp

NO.17 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. AppDomainSetup mySetup =
AppDomain.CurrentDomain.SetupInformation;
mySetup.ShadowCopyFiles = "true";
B. System.Diagnostics.Process myProcess;
myProcess = new System.Diagnostics.Process();
C. AppDomain domain;
domain = AppDomain.CreateDomain("MyDomain");
D. System.ComponentModel.Component myComponent;
myComponent = new System.ComponentModel.Component();
Answer: C

Microsoft   070-536-Csharp originale fragen   070-536-Csharp

NO.18 You need to write a code segment that will add a string named strConn to the connection string section
of the application configuration file.
Which code segment should you use?
A. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
myConfig.Save();
B. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
C. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
D. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.Save();
Answer: A

Microsoft   070-536-Csharp exam fragen   070-536-Csharp   070-536-Csharp originale fragen

NO.19 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. public class Age {
public int Value;
public object CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(obj);
}
throw new ArgumentException("object not an Age");
}
}
B. public class Age {
public int Value;
public object CompareTo(int iValue) {
try {
return Value.CompareTo(iValue);
} catch {
throw new ArgumentException ("object not an Age");
}
}
}
C. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(_age.Value);
}
throw new ArgumentException("object not an Age");
}
}
D. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
try {
return Value.CompareTo(((Age) obj).Value);
} catch {
return -1;
}
}
}
Answer: C

Microsoft zertifizierung   070-536-Csharp   070-536-Csharp zertifizierung   070-536-Csharp prüfungsfrage   070-536-Csharp originale fragen   070-536-Csharp dumps

NO.20 You are developing an application that stores data about your company's sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
B. ArrayList team = new ArrayList();
team.Add("1, Hance");
team.Add("2, Jim");
team.Add("3, Hanif");
team.Add("4, Kerim");
team.Add("5, Alex");
team.Add("6, Mark");
team.Add("7, Roger");
team.Add("8, Tommy");
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
D. string[] team =
new string[] {"1, Hance",
"2, Jim", "3, Hanif",
"4, Kerim", "5, Alex",
"6, Mark", "7, Roger",
"8, Tommy"};
Answer: C

Microsoft   070-536-Csharp   070-536-Csharp zertifizierungsantworten   070-536-Csharp

Pass4Test bietet Ihnen die neusten MB7-702 exam Unterlagen und MB6-870 pdf Fragen & Antworten mit hoher Qualität. Unser LOT-405 zertifizierung und IIA-CFSA prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative HP2-B25 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/070-536-Csharp.html